Sign Making Supplies

Magnetic sheets normally available in rolls 620mm x 50 meters. It has a medium brown with a white screen to apply lettering or e directly on it. The sheet has a tensile strength 40g/cm2 is the pulling force of the vehicle recommended for the qualities of magnetic material.

The 0.85mm is also a 56g/cm2 the highest quality vehicles of laminations in the United Kingdom.

The quality of material is used to produce signs for taxis and the signs of the vehicle. Please be aware that there are more thin quality, but are of poorer quality. It cane be screen printed and installed vinyl letters, to give the customer a perfect advertising tool for any vehicle.

The sheet can be cut to any shape with a series of scissors or a hobby knife. Most sheets are available in different colors, white, silver, green, red, blue and black. If your client has a specific color, do not panic, just cover the entire sheet with a colored vinyl. Always apply the vinyl damp cloth to remove the bubbles.

Maybe you want to place a digital image printed on the sheet? No problem, print directly on vinyl and then applied to the sheet.

The care and application of magnetic signs.

I recommend a standardized information sheet to be issued to all customers who purchase magnetic signs for you. A set of simple guidelines with details of your company on the bottom of the sheet is an excellent way to provide that little something for the customer.

The vehicle and the brown magnetic side of the sign must be clean and dry. Check all the edges to the folds, cuts, bumps and bruises. If there is one of those leaves in its really simple to fix. Take a sheet of brown paper with a hot iron, was a sign on a magnetic board, now place the sheet of brown paper on the sign, now applying the iron where there is an increase of bumps, board up 'to this dish.

When the sign is not used Make sure that you place on a flat surface, like a refrigerator door, filing cabinet or something flat and smooth.

Before putting the sign on the vehicle, clean and polish the paint. Do the same with the brown part of the sign.

If the vehicle has been freshly painted beware, the sign o the magnetic pole painting and prove difficult to remove.

Remove the sign frequently to avoid the fragmentation of laminations. Also delete to allow natural light to paint to the vehicle naturally and evenly.

Do not put magnetic signs on the hoods of vehicles because the heat in the engine and wind are taken at the edge of the sheet and it will end mid-way on the highway!

Do not apply to frozen, frosted, hot and humid vehicles.

Do not allow panels to direct sunlight or extreme cold for long periods while on or off vehicle.

Avoid speeds over 70 miles per hour.

Remove the panels at least once a week.

Remove any dirt road or a movie before applying your sign.

signs removed after the rain, snow or ice must be cleaned with a clean dry cloth.

Do not wash it clean using a mild detergent, like dishwashing liquid.

Do not use detergents and solvents.

Do not lean heavy objects against the signs of storage.

During the cold season can sign uncurl in a warm atmosphere before use.

Store at room temperature out of direct sunlight.

Obviously the magnetic signs will not work on vehicles not steel.

The signs are not designed for use on moldings and nicks in the panels of the vehicle.

The best way to adapt to allow the magnetic signs on one sign to be aligned with the panel on the vehicle, then let the magnet do the job. If this is not straight, then simply lift again and reapply. Make sure there are no air pockets under the sheet.

Thinking.